Tuesday, December 8, 2009

Guide to Install 7 Unknown Device

Compile by: IVAN (em'pe)
edit by: Black-x


NOTES:
THIS GUIDE CREATED BY IVAN CONTAIN TWO INSTALLATION METHOD:

1. AUTO INSTALLATION
2. MANUAL INSTALLATION.

==========================
PART 1: AUTO INSTALLATION
==========================
notes: click the picture to enlarge:

1. Open device manager by click start, run, type DEVMGMT.MSC

2.On the device manager, right click on the unknown devices, select update driver.




3. Then a hardware update wizard will appear, select no not this time.



4. On the next screen select install the driver software automatically.



5. Then just wait until the windows finish copying and installing the drivers.


6. After that click finish.


7. You would be able to see there are no more unknown device in the device manager, that means the driver are successfully installed.





========================
2. MANUAL INSTALLATION.
========================
1. Open device manager by click start, run, type DEVMGMT.MSC

2.On the device manager, right click on the unknown devices, select update driver.



3. Then a hardware update wizard will appear, select no not this time.



4. Select Install from a list or specific location (ADVANCE).




5. On the next screen , select don't search, i will choose drivers to Install



6. select  Show All Devices, next.



7. Here select have disk.



8. Then select Browse



9. Then browse to the 7 unknown devices driver folder, (i recommend to put the 7 unknown device at desktop to make your work easier)



10. Select the machine.inf file and press open.




11. After press open it should look like this.



11.After press ok, select next.



12. It should copying and installing the drivers now, ignore if XP complain.



 13. AFter finish, there should be no more unknown device in the device manager.

0 comments:

Post a Comment